Additional findface-video-worker
deployment on remote hostsΒΆ
To install only the findface-video-worker
service, do the following:
Tip
Be sure to consult the system requirements prior.
Tip
If you have several video cards on your server, see Multiple Video Cards Usage before deploying findface-video-worker-gpu
.
Download the installer file
<findface-security-and-server-xxx>.run
.Put the
.run
file into some directory on the designated host (for example,/home/username
).From this directory, make the
.run
file executable.chmod +x <findface-security-and-server-xxx>.run
Execute the
.run
file.sudo ./<findface-security-and-server-xxx>.run
The installer will ask you a few questions and perform several automated checks to ensure that the host meets the system requirements. Fill out the prompts appropriately once requested. The questions are the following:
- Product to install: FindFace Video Worker.
- Type of
findface-video-worker
package: CPU or GPU. - The IP address of the FindFace Enterprise Server host.
After that, the installation process will automatically begin.
Note
The answers will be saved to a file
/tmp/<findface-installer-*>.json
. You can edit this file and use it to installfindface-video-worker
on other hosts without having to answer the questions again. See Installation File for details.sudo ./<findface-security-and-server-xxx>.run -f /tmp/<findface-installer-*>.json
Note
If you chose to install findface-ntls
and/or findface-video-manager
on different hosts than that with findface-sf-api
, specify their IP addresses in the findface-video-worker
configuration file after the installation.
sudo vi /etc/findface-video-worker-cpu.ini
sudo vi /etc/findface-video-worker-gpu.ini
In the ntls-addr
parameter, specify the findface-ntls
host IP address.
ntls-addr=127.0.0.1:3133
In the mgr-static
parameter, specify the findface-video-manager
host IP address, which provides findface-video-worker
with settings and the video stream list.
mgr-static=127.0.0.1:18811