Additional findface-video-worker deployment on remote hostsΒΆ

To install only the findface-video-worker service, do the following:

Tip

Be sure to consult the system requirements prior.

Tip

If you have several video cards on your server, see Configure Multiple Video Cards Usage before deploying findface-video-worker-gpu.

  1. Download the installer file findface-security-2.1.0-server-3.1.0.run.

  2. Put the .run file into some directory on the designated host (for example, /home/username).

  3. From this directory, make the .run file executable.

    chmod +x findface-security-2.1.0-server-3.1.0.run

  4. Execute the .run file.

    sudo ./findface-security-2.1.0-server-3.1.0.run

    The installer will ask you a few questions and perform several automated checks to ensure that the host meets the system requirements. Fill out the prompts appropriately once requested. The questions are the following:

    1. Product to install: FindFace Video Worker.
    2. Type of findface-video-worker package: CPU or GPU.
    3. IP address of the FindFace Enterprise Server host.

    After that, the installation process will automatically begin.

    Note

    The answers will be saved to a file /tmp/<findface-installer-*>.json. You can edit this file and use it to install FindFace Enterprise Server on other hosts without having to answer the questions again. See Installation File for details.

Note

If you chose to install findface-ntls and/or findface-video-manager on different hosts than that with findface-sf-api, specify their IP addresses in the /etc/findface-video-worker.ini configuration file after the installation.

sudo vi /etc/findface-video-worker.ini

In the ntls-addr parameter, specify the findface-ntls host IP address.

ntls-addr=127.0.0.1:3133

In the mgr-static parameter, specify the findface-video-manager host IP address, which provides findface-video-worker with settings and the video stream list.

mgr-static=127.0.0.1:18811